What are the precautions for large CNC machining?

2021/10/10


In the actual large CNC processing, many factors will be considered in order to smoothly carry out the processing, so what is the large CNC processing of the precautions? Take a look at the following introduction.
 
Large CNC machining has what to pay attention to
 
1, product analysis. Through the product analysis should obtain a certain composition of information and some specific processing requirements.
 
2, graphic design. The design of graphics should first be based on a detailed analysis of the product.
 
3、Process planning. Through the preliminary analysis of the appearance and processing requirements of the workpiece product, each processing step is reasonably established from the overall picture of processing.
 
4、Path generation. The process of path generation is actually the process planning through the software to achieve, while through the setting of parameters for the tool path to be certain optimization.
 
5、Path simulation. After the path is generated, we will generally have no intuitive sense of its final performance on the machine tool, where we can check the possible problems through the path simulation, thereby reducing the actual machining scrap rate.
 
6、Path output. Path output is the software design programming in the machine tool above the necessary steps to achieve.
 
HXTech precision company large CNC processing production equipment, to achieve the processing of a one-stop service model, the whole process for customer service, customer first, quality first, to the satisfaction of the service as the goal, if you are interested in our products, please contact us.